If the automatic slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. So everyone knows what the technological requirements for operating the slitter are?
Process requirements for operating the slitter:
1. The fixed-length slitting control is divided into static and dynamic slitting: when the set length is reached, the machine stops accurately, then the static slitting is processed, and the slitting is restarted.
2. The slitting machine shall cut the whole roll or the whole raw material with a fixed length, and the plastic packaging materials, packaging cartons, wood chips, etc. shall be cut with a fixed length.
3. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
4. The most important performance index of fixed-length slitting is slitting accuracy, and the consistency of finished product length is good.
The use of slitting machine is completed by slitting machine and cross-cutting machine. Therefore, high-quality slitting knife and cross-cutting knife should be used. When we all use the slitting machine, we all need to install the above process to operate.