What causes the running axis of the slitter?

  Slitting machine is a very important equipment. We often have the situation of running shaft of slitting machine. So what are the reasons for the running shaft of slitting machine?

  The slitter divides the film and divides it into the inner and outer sides for winding. The winding station on the inner and outer sides is installed on the beam controlled by the hydraulic cylinder. Under the control of the hydraulic cylinder, the beam is driven by the piston and connecting rod of the hydraulic cylinder to move the beam back and forth within a certain angle, so as to achieve the purpose of ensuring the normal winding pressure and the purpose of loading and unloading. Analyze the automatic control process and faults.

  During the working process of the slitting machine, the inner and outer beams often move in the direction of unwinding at the same time, so that the product in the rewinding direction moves in the direction of unwinding. Finally, the winding pressure roller is separated from the product, and the winding pressure is lost, resulting in the post-cutting. The film deflects on the outer layer of the product and breaks the film, which cannot be produced. Sometimes, the film slitter is just turned on, and sometimes the film is slit to a certain length.

  When we all use the slitting machine, we all need the correct method to operate and use this kind of slitting machine. When the slitting machine has a running shaft, it is generally caused by the above reasons.