DC-SLM-1850 PLC Controlled Vertical Aluminum Foil Slitting Machine Copper Foil Slitter
Application:
The machine is suitable for the slitting, rewinding of the following items in :
Aluminum foil processing industry:
food foil, air conditioner foil, household foil, drugs foil, battery foil, cable foil, electronic foil,
H status/O status light gauge foil/Medium gauge foil (0.0045~0.035mm).
Performance and Features:
The machine uses PLC, touch display screen, servo driver with servo motor.
The PLC controls the rolling speed and tension of the slitting process.
Automatically calculated the rewinding and unwinding diameter.
The diameter tolerance is±1 mm.
Automatic deceleration stop once unwinding to small diameter.
Automatically stop once reaching the preset length.
Automatically stop once the aluminum foil is broken.
The rewinding adopts by the surface of the upper and lower shaft center. Rewinding by single shaft is also workable.
The winding shaft and rewinding shaft are the special inflatable shaft.
The slitting is finished by the upper/lower round cutter or straight cutter.
The slitting width is adjustable.
With the quality electrical components, simple circuit and highly automatically , the machine is easy to operate and maintain.
Technical Parameters:
Material of slitting | Aluminum foil(0.0045~0.035mm) |
Working Speed | 350M/min |
Unwind Width | 1850mm |
Shaft diameter | 3”(75mm/76mm), 6”(150mm/152mm) or Normal diameter |
Unwind Diameter | Φ1000mm |
Rewind Diameter | Φ600mm |
Rewnd Width | 120mm-1850mm (any slitting width≥120mm is workable) |
Slitting Knife | Straight knife, Power round knife |
Note: the technical parameters can be customized.