DC-SLM-1100 Microcomputer Controlled Aluminum-Plastic Film Slitting Machine
Application:
The machine is suitable for the slitting, rewinding of the following items:
Aluminum plastic film of power lithium battery,
Aluminum plastic film of digital lithium battery,
Paper or other film,
Performance and Features:
The machine uses PLC, touch display screen, servo driver with servo motor.
The PLC controls the rolling speed and tension of the slitting process.
Automatically calculated the rewinding and unwinding diameter.
The diameter tolerance is±1 mm.
Automatic deceleration stop once unwinding to small diameter.
Automatically stop once reaching the preset length.
Automatically stop once the aluminum plastic film is broken.
The rewinding adopts by the surface of the upper and lower shaft center. Rewinding by single shaft is also workable.
The winding shaft and rewinding shaft are the special inflatable shaft.
The slitting is finished by the upper/lower round cutter or straight cutter.
The slitting width is adjustable.
With the quality electrical components, simple circuit and highly automatically , the machine is easy to operate and maintain.
Technical Parameters:
Material of slitting | Aluminum-plastic film, paper, film for soft package of battery(0.08~0.16mm) |
Working Speed | 250M/min |
Unwind Width | 1100mm |
Shaft Diameter | 3”(75mm/76mm), 6”(150mm/152mm) or Normal diameter |
Unwind Diameter | Φ800mm |
Rewind Diameter | Φ600mm |
Rewind Width | 50mm-1100mm (any slitting width≥50mm is workable) |
Slitting Knife | Straight knife, round knife |
Note: the technical parameters can be customized.