Application:
The machine is suitable for the slitting and rewinding of the following products:
Kraft paper, label paper, electroplated paper, aluminum foil paper, adhesive paper, toothpick paper and other paper materials.
Performance and Features:
The machine uses PLC, touch display screen, servo driver with servo motor.
The PLC controls the rolling speed and tension of the slitting process.
Automatically calculated the rewinding and unwinding diameter.
The diameter tolerance is±1 mm.
Automatic deceleration stop once unwinding to small diameter.
Automatically stop once reaching the preset length.
Automatically stop once the aluminum foil is broken.
The rewinding adopts by the surface of the upper and lower shaft center. Rewinding by single shaft is also workable.
the winding shaft and rewinding shaft are the special slip shaft.
It's suitable for materials with inconsistent thickness.
The slitting is finished by the upper/lower round cutter or straight cutter.
The slitting width is adjustable.
With the quality electrical components, simple circuit and highly automatically , the machine is easy to operate and maintain.
Technical Parameters:
Material of slitting | Kraft paper, label paper, electroplated paper, aluminum foil paper, adhesive paper, toothpick paper and other paper materials |
Working Speed | 300M/min |
Unwind Width | 1700mm |
Shaft Diameter | 3”(75mm/76mm), 6”(150mm/152mm) or Normal diameter |
Unwind Diameter | Φ1000mm |
Rewind Diameter | Φ600mm |
Rewind Width | 5mm-1700mm (any slitting width≥5mm is workable) |
Slitting Knife | round knife |
Note: the technical parameters can be customized.